LEGATO 111 Syringe Pump
Dual syringe programmable touch screen infusion/withdrawal pump
LEGATO 111 - SYRINGE PUMP
Dual syringe infuse/withdraw with program option for 2 programs. 50 steps each. Accommodates syringes 0.5 µl to 10 ml. User definable flow rates with selectable target volume or time values to control the total infusion volume.
The NEW Legato™ 111 dual syringe infuse/withdrawal nanoliter syringe pump is ideal for applications that require smooth accurate flow performance.
The KDS Legato 111 infuse/withdraw is a dual syringe pump with a touch screen interface. It is based on the Legato 101 and is enhanced with
multi-mode capability like the Legato 110 and multistep programming.
The Legato 111 has a wide flow rate range from 1.26 pl/min to 25.99 ml/min depending on syringe size. The large touch screen color display allows the user to see all of the pumps operating parameters to ensure proper operation during the experiments.
Syringe size and flow rate are easily displayed as well as the volume delivered and the elapsed time. Set up is easy using the icon driven software. Any type of syringe can be used in the unit including glass, plastic and stainless steel.
Features
- Holds one or two syringes from 0.5 µl to 10 ml
- High resolution color touch screen
- Unparalleled ease of use
- Touch pad "lock" feature
- LED light on front panel
- Full metal chassis
- Built in syringe table
- Up to 30 lb/13 kg linear force
- Advanced microstepping techniques
- Built in RS485 interface
- USB port
- I/O & TTL interface
- Continuous mode of operation
- Spill dam
- Programmable
Technical specifications
| Accuracy |
±0.5%
|
| Reproducibility |
±0.05%
|
| Syringes (Min/Max) |
0.5 µl to 10 ml
|
| Flow Rate |
Minimum (0.5 µl syringe): 1.28 pl/min
Maximum (10 ml syringe): 25.99 ml/min
|
| Display |
4.3 WQVGA TFT Color Display with Touchpad
|
| Non-Volatile Memory |
Stores all Settings
|
| Connectors |
RS485 - IEEE-1394 6 pos
USB - Type B
I/O & TTL - 15 pin D-Sub Connector
|
| Linear Force (Max) |
13.6 kg (30 lb) @ 100% Force Selection
|
| Drive Motor |
0.9 Stepper Motor
|
| Motor Drive Control |
Microprocessor with 1/16 microstepping
|
Number of Microsteps
per one rev.of Lead Screw |
15,360
|
| Step Revolution |
0.069 µm/step
|
| Step Rate - Minimum |
27.5 sec/µstep
|
| Step Rate - Maximum |
26 µsec/µstep
|
| Pusher Travel Rate - Minimum |
0.15 µm/min
|
| Pusher Travel Rate - Maximum |
159 mm/min
|
| Power |
100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse
|
| Dimensions |
22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in)
|
| Weight |
2.66 kg (5.9 lb)
|
| Operating Temperature |
4 degree C to 40 degree C (40 degree F to 104 degree F)
|
| Storage Temperature |
-10 degree C to 70 degree C (14 degree F to 158 degree F)
|
| Humidity |
20% to 80% RH non condensing
|
| Mode of Operation |
Continuous
|
| Classification |
Class 1
|
| Pollution Degree |
1
|
| Installation Category |
11
|