Mini sample concentrator

Synchronously working with heating by dry bath in the bottom and nitrogen blowing

Mini concentrator for samples, equipped with two aluminium blocks.

Nitrogen concentrator is mainly used for enrichment of large-volume sample or preparation (such as drug screening, hormone analysis, liquid phase, and mass spectrometry in the analysis of sample preparation).

Working principle: the nitrogen into the heated surface of the sample and make the solvent evaporate and separated rapidly, thereby reaching the sample enrichment purpose without oxygen, keep the sample purer.

Nitrogen concentrator instrument can concentrated dozens of samples simultaneously, saving time and high efficient, instead of rotary evaporation instrument.

Features

Synchronously working with heating by dry bath in the bottom and nitrogen blowing on the surface accelerates liquid evaporation and sample concentration
The position of gas needle in air cavity can be adjusted to suit for different types of tubes
The height of the air cavity can be adjusted. The length of a standard gas needle is 150mm
Gas needle is controlled independently. Separately blow of each needle and flow regulating of each needle are available to avoid gas waste
The entire equipment can be put into ventilation cabinet when the concentration sample in toxic solvents
Built in overheat protection, automatic fault detection and fault beep alarm devices
LED display immediate temperature and diminishing time
Operation is simple and convenient
Standard configured air cavity and adjustable bracket

Technical specifications

Code	MB/012/002
Temp. Range	R.T.+5℃ ~100℃
Temp. Accuracy	≤±0.5℃ (40÷100°C) ≤±1℃ (100÷150°C)
Temp.Stability	≤±0.5℃ (100°C)
Display temperature resolution	0.1℃
Heating Time	≤12 min (da 40℃ a 100℃)
Timer	1s ~ 999s or 1min ~ 999min
Gas Pressure	≤0.1 MPa
Gas Flow Rate	0 ÷10 L/min
Blocks Quantity	1 blocco standard
Power	60 W
Dimensions (WxDxH)	110 x 156 x 400 mm
Enclosed blocks	2 interchangeable blocks