Choose your language: it-IT en-US
Facebook Twitter Instagram

Thermo Shaker Block Incubator

With fast mixing speed and integrates heating and cooling

Thermo Shaker Incubator (cooling)

Thermo Shaker Incubator (Cooling) is themo shaker incubator with fast mixing speed and integrates four function mixing, shaking, heating function and Cooling function.

Combined with intelligent operation design, it not only can mix various micro volume tube, PCR plate, deep hole plate and micro plate and other common laboratory supplies, but also equipped he function of votexing and heating all kinds of tubes. It can meet the needs of different users.

Features

  • Perfect radius and excellent dimensional technology blend with adjustable mixing speed
  • Programmable. Efficient shaking and temperature control
  • Restore from power off, recover to the pre-status automatically (deleted)
  • Microprocessor controlled incubator
  • Good linearity of temperature control
  • Precise control of the shaking speed
  • Timing function
  • Time range is from 0 to 100 hours
  • Various blocks to exchange, convenient for replacement
  • Built-in temperature calibration function and short mixing function
  • DC brushless motor drive, long life and free of maintenance
  • Multiple safety protection function
  • Conform to CE safety standards, safe and reliable

    Technical specifications

    Code MB/003/002
    Speed range 300÷1.500 rpm
    Shaking orbit 3 mm (horizontal)
    Temp. Max. Decrease R.T. decreases 20℃
    Temp. Setting Range 0÷100 ℃
    Temp. Stability ≤±0.3℃
    Block Temp. Uniformity ≤±0.3℃
    Temp. Display Accuracy 0.1℃
    Heating Speed ≤15min (20℃ to 100℃)
    Cooling Speed ≤30min (R.T. decrease 20℃) 
    @R. T. 26℃
    Time Range 1min ~99h59min or continuous
    Voltage AC 90V ~230V, 50/60Hz
    Power 200 W
    Dimension (WxDxH) 196 x 270x 170mm
    Net Weight 8.8 kgs


    Aluminium blocks

    Code   Spec   Dia. of hole   Hole bottom shape
    MB/003/004   0.2 ml x 96   6.7 mm   Cone bottom
    MB/003/005   0.5 ml x 54   8 mm   Cone bottom
    MB/003/006   1.5 ml x 35   10.8 mm   Cone bottom
    MB/003/007   2.0 ml x 35   10.8 mm   Round bottom
    MB/003/008   0.5 ml x 20
    1.5ml x 15
      8 mm / 10.8mm   Cone bottom
    MB/003/009   ≤Φ12mm x 24   12 mm   Flat bottom
    MB/003/010   0.2 ml x 32
    1.5ml x 25
      6.1 mm / 10.8mm   Cone bottom
    MB/003/011   0.2 ml x 32
    0.5 ml x 10
    1.5ml x 15
      6.1 mm
     8 mm
     10.8 mm
      Cone bottom
    MB/003/012   Water Bath   103 x 67 x 30 mm   Flat bottom
    MB/003/013   Flat bottom plates   Top size 
    69 x 107 x 12 mm
      Flat plate block
    MB/003/014*   5 ml x 24   13.5 mm   Flat bottom
    MB/003/015*   15 ml x 12   16.9 mm   Flat bottom
    MB/003/016*   50 ml x 6   29.5 mm   Flat bottom
    MB/003/019 Cover for non standard blocks*
    MB/003/020 Support 96×0,2  ml microtubes
    MB/003/021 Support 24×0,5 ml  microtubes
    MB/003/022 Support 24×1,5/2,0 ml microtubes

    * Non-standard height blocks; It is not possible to cover them with the supplied cover.
    For  cover those  blocks it is necessary to buy the accessory lid of upper height cod. MB/003/019


You might also be interested in these items
all rights reserved © 2017 CHEIMIKA SAS DI HEIM JURGENYour purchases are guaranteed by the major lenders
Powered by NapoliWeb S.r.l. - Web Agency Napoli Web Agency Napoli