Choose your language: it-IT en-US
Facebook Twitter Instagram

ThermoMixer block incubator

Fast mixing speed and integrates three function mixing, shaking and heating function.

Block heater with shaking.

Thermo Shaker Incubator (Heating) is themo shaker incubator with fast mixing speed and integrates three function mixing, shaking and heating function.

Combined with intelligent operation design, it not only can mix various micro volume tube, PCR plate, deep hole plate and micro plate and other common laboratory supplies, but also equipped he function of votexing and heating all kinds of tubes.

It can meet the needs of different users.

Features

  • Perfect radius and excellent dimensional technology blend with adjustable mixing speed
  • Programmable
  • Efficient shaking and temperature control
  • Restore from power off, recover to the pre-status automatically (deleted)
  • Microprocessor controlled incubator. Good linearity of temperature control
  • Precise control of the shaking speed
  • Timing function
  • Time range is from 0 to 100 hours
  • Various blocks to exchange, convenient for replacement 
  • Built-in temperature calibration function and short mixing function
  • DC brushless motor drive, long life and free of maintenance
  • Multiple safety protection function
  • Conform to CE safety standards safe and reliable

Technical specifications

Code MB/003/003
Speed range 300÷2.000 rpm
Shaking orbit 3 mm (horizontal)
Temp. Control Range R.T.+5℃ ÷100℃
Temp. Setting Range 5°C÷100 ℃
Temp. Stability ≤±0.3℃
Block Temp. Uniformity ≤±0.3℃
Temp. Display Accuracy 0.1℃
Heating Speed ≤15min (20℃ to 100℃)
Time Range 1min ~99h59min or continuous
Voltage AC 90V ~230V, 50/60Hz
Power 200 W
Dimension (WxDxH) 196 x 270x 170mm
Net Weight 8.2 kgs

 

Aluminium blocks

Code   Spec   Dia. of hole   Hole bottom shape
MB/003/004   0.2 ml x 96   6.7 mm   Cone bottom
MB/003/005   0.5 ml x 54   8 mm   Cone bottom
MB/003/006   1.5 ml x 35   10.8 mm   Cone bottom
MB/003/007   2.0 ml x 35   10.8 mm   Round bottom
MB/003/008   0.5 ml x 20
1.5ml x 15
  8 mm / 10.8mm   Cone bottom
MB/003/009   ≤Φ12mm x 24   12 mm   Flat bottom
MB/003/010   0.2 ml x 32
1.5ml x 25
  6.1 mm / 10.8mm   Cone bottom
MB/003/011   0.2 ml x 32 
0.5 ml x 10
1.5ml x 15
  6.1 mm
 8 mm
 10.8 mm
  Cone bottom
MB/003/012   Water Bath   103 x 67 x 30 mm   Flat bottom
MB/003/013   Flat bottom plates   Top size 
69 x 107 x 12 mm
  Flat plate block
MB/003/014*   5 ml x 24   13.5 mm   Flat bottom
MB/003/015*   15 ml x 12   16.9 mm   Flat bottom
MB/003/016*   50 ml x 6   29.5 mm   Flat bottom
MB/003/019 Cover for non standard blocks*
MB/003/020 Support 96×0,2  ml microtubes
MB/003/021 Support 24×0,5 ml  microtubes
MB/003/022 Support 24×1,5/2,0 ml microtubes

* Non-standard height blocks; It is not possible to cover them with the supplied cover. 
For  cover those  blocks it is necessary to buy the accessory lid of upper height cod. MB/003/019


You might also be interested in these items
all rights reserved © 2017 CHEIMIKA SAS DI HEIM JURGENYour purchases are guaranteed by the major lenders
Powered by NapoliWeb S.r.l. - Web Agency Napoli Web Agency Napoli