ThermoMixer block incubator
Fast mixing speed and integrates three function mixing, shaking and heating function.
Block heater with shaking.
Thermo Shaker Incubator (Heating) is themo shaker incubator with fast mixing speed and integrates three function mixing, shaking and heating function.
Combined with intelligent operation design, it not only can mix various micro volume tube, PCR plate, deep hole plate and micro plate and other common laboratory supplies, but also equipped he function of votexing and heating all kinds of tubes.
It can meet the needs of different users.
Features
- Perfect radius and excellent dimensional technology blend with adjustable mixing speed
- Programmable
- Efficient shaking and temperature control
- Restore from power off, recover to the pre-status automatically (deleted)
- Microprocessor controlled incubator. Good linearity of temperature control
- Precise control of the shaking speed
- Timing function
- Time range is from 0 to 100 hours
- Various blocks to exchange, convenient for replacement
- Built-in temperature calibration function and short mixing function
- DC brushless motor drive, long life and free of maintenance
- Multiple safety protection function
- Conform to CE safety standards safe and reliable
Technical specifications
| Code |
MB/003/003 |
| Speed range |
300÷2.000 rpm |
| Shaking orbit |
3 mm (horizontal) |
| Temp. Control Range |
R.T.+5℃ ÷100℃ |
| Temp. Setting Range |
5°C÷100 ℃ |
| Temp. Stability |
≤±0.3℃ |
| Block Temp. Uniformity |
≤±0.3℃ |
| Temp. Display Accuracy |
0.1℃ |
| Heating Speed |
≤15min (20℃ to 100℃) |
| Time Range |
1min ~99h59min or continuous |
| Voltage |
AC 90V ~230V, 50/60Hz |
| Power |
200 W |
| Dimension (WxDxH) |
196 x 270x 170mm |
| Net Weight |
8.2 kgs |
Aluminium blocks
| Code |
Spec |
Dia. of hole |
Hole bottom shape |
| MB/003/004 |
0.2 ml x 96 |
6.7 mm |
Cone bottom |
| MB/003/005 |
0.5 ml x 54 |
8 mm |
Cone bottom |
| MB/003/006 |
1.5 ml x 35 |
10.8 mm |
Cone bottom |
| MB/003/007 |
2.0 ml x 35 |
10.8 mm |
Round bottom |
| MB/003/008 |
0.5 ml x 20
1.5ml x 15 |
8 mm / 10.8mm |
Cone bottom |
| MB/003/009 |
≤Φ12mm x 24 |
12 mm |
Flat bottom |
| MB/003/010 |
0.2 ml x 32
1.5ml x 25 |
6.1 mm / 10.8mm |
Cone bottom |
| MB/003/011 |
0.2 ml x 32
0.5 ml x 10
1.5ml x 15 |
6.1 mm
8 mm
10.8 mm |
Cone bottom |
| MB/003/012 |
Water Bath |
103 x 67 x 30 mm |
Flat bottom |
| MB/003/013 |
Flat bottom plates |
Top size
69 x 107 x 12 mm |
Flat plate block |
| MB/003/014* |
5 ml x 24 |
13.5 mm |
Flat bottom |
| MB/003/015* |
15 ml x 12 |
16.9 mm |
Flat bottom |
| MB/003/016* |
50 ml x 6 |
29.5 mm |
Flat bottom |
| MB/003/019 |
Cover for non standard blocks* |
| MB/003/020 |
Support 96×0,2 ml microtubes |
| MB/003/021 |
Support 24×0,5 ml microtubes |
| MB/003/022 |
Support 24×1,5/2,0 ml microtubes |
* Non-standard height blocks; It is not possible to cover them with the supplied cover.
For cover those blocks it is necessary to buy the accessory lid of upper height cod. MB/003/019
