Block Heater
LCD display, simple interface, double time and temperature settings
Dry bath incubator.
It's a microprocessor-controlled device, high precision of temperature control, sample preparation parallelism, as an alternative to the traditional water bath device.
It can be widely used in samples cultivation, preservation and reaction, DNA amplification, Pre degeneration of electrophoresis and solidification.
Application of industry includes the pharmaceutical, chemical, food safety, environment, quality inspection.
Features
- LCD display, simple interface, double time and temperature settings
- Simultaneous display of set temperature display, time diminishing display
- High heating speed, uniform heating, accurate temperature control, high stability, low energy consumption and no noise
- Built in temperature calibration function, automatic fault detection and buzzer alarm function
- Built in over-temperature protection device, safe and reliable use, prolong the service life of the machine
- Product design, compact and tight, small occupied space, freer and easier
- Various blocks for convenient replacement, cleaning and disinfection
Technical specifications
| Code |
MB/005/021 |
| Temperature control range |
R.T. +5,0°C ÷ +100°C |
| Temp. Stability |
≤±0.5℃ (100°C)
≤±0.3℃ (40°C) |
| Block Temp. Uniformity |
≤±0.3℃ |
| Temp. Display Accuracy |
0.1℃ |
| Heating Speed |
≤15min (20℃ to 100℃) |
| Time Range |
1min ~99h59min or continuous |
| Voltage |
AC 90V ~230V, 50/60Hz |
| Power |
150 W |
| Dimension (WxDxH) |
196 x 270x 170mm |
| Net Weight |
2,2 kgs |
Aluminium blocks
| Code |
Spec |
Dia. of hole |
Hole bottom shape |
| MB/005/022 |
0.2 ml x 96 |
6.7 mm |
Cone bottom |
| MB/005/023 |
0.5 ml x 54 |
8 mm |
Cone bottom |
| MB/005/024 |
1.5 ml x 35 |
10.8 mm |
Cone bottom |
| MB/005/025 |
2.0 ml x 35 |
10.8 mm |
Round bottom |
| MB/005/026 |
0.5 ml x 20
1.5ml x 15 |
8 mm / 10.8mm |
Cone bottom |
| MB/005/027 |
≤Φ12mm x 24 |
12 mm |
Flat bottom |
| MB/005/028 |
0.2 ml x 32
1.5ml x 25 |
6.1 mm / 10.8mm |
Cone bottom |
| MB/005/030 |
0.2 ml x 32
0.5 ml x 10
1.5ml x 15 |
6.1 mm
8 mm
10.8 mm |
Cone bottom |
| MB/005/031 |
Water Bath |
103 x 67 x 30 mm |
Flat bottom |
| MB/005/032 |
Flat bottom plates |
Top size
69 x 107 x 12 mm |
Flat plate block |
| MB/005/033* |
5 ml x 24 |
13.5 mm |
Flat bottom |
| MB/005/034* |
15 ml x 12 |
16.9 mm |
Flat bottom |
| MB/005/035* |
50 ml x 6 |
29.5 mm |
Flat bottom |
| MB/005/038 |
Cover for non standard blocks* |
* Non-standard height blocks; It is not possible to cover them with the supplied cover.
For cover those blocks it is necessary to buy the accessory lid of upper height cod. MB/003/019