Vacuum pump 26 l/min with 250 ml flask

Compact and practical, simple operation, high efficiency and low noise

This vacuum pumpis an important corollary equipment to raise filtering efficiency and enhancing degassing effects.

To avoid filtering medium polluted, oil free diaphragm type vacuum pump is a common choice.

Oil free diaphragm type vacuum pump forms a vacuum by back and forth movement of rubber diaphragm.

Its vacuum pressure is around 0.08Mpa (single-stage).

This model is specially designed to assort various demands of the laboratory vacuum equipments.

It can be used for vacuum concentration, vacuum filtration, vacuum drying, etc.

Features

Provide enough motor power to reduce fevers
The vacuum membrane is made of high quality oil resistivity and fatigue resistance rubber with 3mm interlayer to rengthen the textile skeleton. Long service life
Compact and practical, simple operation, high efficiency and low noise
Optional regulating type and vent valve configuration

Attention

Filtration efficiency mainly depends on the flow exhausted per unit time (namely the flow index of the vacuum pump), especially in case of large filtration capacity or high medium viscosity
Besides proper use method (such as reducing inaction continuous boot, avoid solution into the pump body…), the vacuum pump working life also depends on reasonable motor power, design patterns of vacuum membrane, and its fatigue resistance

Technical specifications

Code	MB/012/008
Flow rate	26 l/min
Vacuum degree	0,08 MPa
Negative pressure adjust range	0÷0,08 MPa
Filtration flask capacity	250 ml
Voltage	AC 220V/AC 110V,50/60Hz
Power	60 W
Dimensions (W×D×H)	196×270×155 mm
Net weight	4,4 kg

You might also be interested in these items